Serving Northern Utah
HONEST LOCAL PRICING GUIDE
HOW MUCH DOES A FENCE COST?
Most online calculators give broad national averages that ignore your actual property. We break down the exact variables that drive installed pricing per foot with transparent rates and zero guesswork.
Prefer to talk directly? Call 801-753-9619 for expert advice
PRICE VARIABLES
THE 6 COST DRIVERS
Every yard is unique. Beyond raw linear footage, these six site-specific conditions determine your final installed estimate.
1. MATERIAL SELECTION
Primary material selection represents the largest cost lever. Raw materials vary in base price, longevity profiles, and installation labor intensity.
2. FENCE HEIGHT
Moving from 4ft to 6ft or 8ft requires longer lumber, deeper post setting, heavier gauge framework, and increased wind-load reinforcement.
3. TERRAIN & ACCESS
Steep slopes, dense tree roots, rocky soil, or narrow access gates require custom racking, stepped panels, or specialized manual post driving.
4. GATES & HARDWARE
Entry points require dedicated hinge posts, latches, and internal steel reinforcement frames to prevent sagging and ensure long-term smooth operation.
5. OLD FENCE REMOVAL
Tearing down dilapidated fence lines, extracting concrete footings, and hauling debris to local disposal facilities adds direct labor and disposal fees.
6. PERMITS & HOA
Municipal building permits, setback engineering, utility locate verifications, and formal HOA submission packages affect pre-construction timeline and costs.
REAL INSTALLED COST RANGES
MATERIAL COMPARISON
Direct price benchmarks for Northern Utah yards based on standard 6-foot residential runs. Exact pricing reflects terrain, gates, and post requirements.
| Material | Installed Cost | Best For |
|---|---|---|
|
Cedar Wood
Most Popular
|
$33 - $45 / ft
|
Complete privacy, backyard enclosures, board-on-board and premium cap-and-trim aesthetics.
|
|
Chain Link
Best Value
|
$26 - $36 / ft
|
Budget-conscious property boundaries, pet containment, acreage, and commercial utility runs.
|
|
Steel
|
$41 - $56 / ft
|
Security-focused perimeters, front-yard curb appeal, and long-term durability with minimal upkeep.
|
|
Vinyl
Most Popular
|
$31 - $42 / ft
|
Ultra-low maintenance full privacy, neighborhood borders, and clean architectural lines without staining.
|
|
Composite
|
$77 - $106 / ft
|
High-end privacy with low maintenance, strong weather resistance, and a premium wood-look finish.
|
Instant estimates based on actual perimeter footage - No commitment required.
PROJECT PREREQUISITES & SCOPE RULES
THE FINE PRINT
Clear, upfront specifications before we break ground. No surprise trip charges, hidden gate markups, or unexpected line fees.
Project Size
Pricing isn't a flat rate per foot — fixed costs like equipment mobilization and gate installation stay the same regardless of size. Smaller projects (typically 60–70 linear feet) see a higher cost/foot, while larger projects spread those costs across more footage for a lower $/ft rate.
GATE HARDWARE & FRAMING
Gates are engineered structural components priced separately from linear foot runs. Depending on material type, walk and double-drive gates include heavy-gauge galvanized steel frame to prevent sagging.
TEAR-OUT & HAUL-AWAY
Existing fence demolition and complete site debris disposal are quoted by the linear foot ($3–$6/ft average). To keep total project costs down, existing concrete is typically not included in haul away.
Instant project pricing configured to your exact perimeter dimensions.
ONLINE FENCE ESTIMATOR TOOL
GET YOUR INSTANT QUOTE
Map your exact perimeter, choose cedar, steel, vinyl, chain link, or composite, and receive immediate installed cost ranges for your yard in under 120 seconds. No sales pressure, no waiting.
100% Free • Instant Calculation • No Sales Rep Required
LONG-TERM PERFORMANCE GUIDE
MATERIAL EXPECTATIONS
Understand the true trade-offs before you build. Every material carries distinct weathering characteristics, structural tolerances, and maintenance demands across Mid-South climate cycles.
CEDAR WOOD PRIVACY
Natural Western Red Cedar provides unmatched warmth, sound buffering, and architectural flexibility. Naturally resistant to decay and insects without harsh chemical treatments.
- PROS: Complete sightline privacy, customizable cap and trim profiles, natural dimensional stability
- CONS: Requires periodic re-staining, prone to natural graying if unsealed
- MAINTENANCE: Apply an oil-based UV penetrating sealant every 3 to 4 years to prevent surface moisture damage
PREMIUM VINYL PRIVACY
Heavy-duty extruded PVC fence panels engineered with UV inhibitors that lock in color and eliminate rotting, splintering, and warping under heavy summer humidity.
- PROS: Zero staining required, clean contemporary appearance, impervious to moisture and insects
- CONS: Higher initial installation investment, difficult to spot-repair individual pickets
- MAINTENANCE: Annual low-pressure garden hose rinse or mild soap wash to remove airborne pollen and surface grime
CHAIN LINK
High-tensile galvanized or black vinyl-coated mesh providing exceptional perimeter security, pet containment, and boundary definition with zero wind resistance.
- PROS: Maximum cost efficiency per foot, 100% transparent views, withstands severe storm winds
- CONS: Minimal visual privacy (unless privacy slats are inserted), utilitarian aesthetic
- MAINTENANCE: Inspect gate latch tensions and lubricate hinges semi-annually; clear base vegetation periodically
STEEL
Heavy-gauge steel engineered for strength and security, delivering timeless iron-style curb appeal with modern protective coatings for long-term durability. Ideal for pool safety, slope adaptation, and open-view perimeters.
- PROS: Lifetime corrosion-free performance, pool-code compliant, rackable panels adjust to slopes
- CONS: Non-privacy design, higher raw material fabrication cost
- MAINTENANCE: Essentially maintenance-free; occasional water rinse to remove lawn debris and dust
FINANCIAL TRANSPARENCY
COMMON CONCERNS
Investing in a perimeter fence is a significant property decision. We eliminate guesswork with guaranteed quotes, transparent financing options, and end-to-end permit coordination.
Direct talk with an estimator : No high-pressure sales
WHAT FINANCING OPTIONS ARE AVAILABLE FOR MY FENCE PROJECT?
We offer multiple payment options through our lending partners, including 0% APR promotional terms up to 24 months. Checking your pre-qualified rates takes less than two minutes.
HOW MUCH DO CITY PERMITS AND HOA APPROVALS COST?
Permit requirements vary by city and by project. Many straightforward residential fence installs don't require one, but requirements depend on your city's code, your property, and your HOA — so we always recommend confirming with your city before starting. We're happy to help you figure out what applies to your project. When a permit is required, cities across Utah County, Salt Lake County, and Weber County typically charge $50–$300 for a residential fence permit. HOA approval, when applicable, is usually free but can take 1–3 weeks for review, so we recommend submitting your HOA request as soon as you get a quote.
DOES INSTALLING A QUALITY FENCE INCREASE PROPERTY RESALE VALUE?
Yes. A well-built fence typically returns 50–70% of its cost in added home value, and in Utah's competitive resale market, a quality vinyl or wood fence is one of the top features buyers search for in listings — especially for homes with kids, pets, or a pool. Fences also boost curb appeal and perceived privacy, which can shorten time on market. Material matters here: vinyl and steel fences hold their resale value longer than wood because they don't need repainting or replacement within the first 10 years.
COULD UNFORESEEN SITE CONDITIONS CAUSE EXTRA CHARGES LATER?
We strive to be fully transparent about costs and upfront about pricing from the start. In some cases, additional charges may apply due to conditions underground that can't be seen or known before digging begins — most commonly hard digs caused by rock, extremely compacted soil, or buried boulders, which are common throughout Utah County's foothill and bench areas. If we hit unexpected conditions like this, we'll always communicate with you before any extra work is done, so there are no surprises on your final bill.
WHAT IS THE DEPOSIT AND PAYMENT SCHEDULE FOR INSTALLATION?
We require a 50% deposit to begin your project. Once your deposit is received, we'll schedule your installation date. The remaining 50% balance is due on the day your project is completed.
FREE ON-SITE CONSULTATION
START YOUR PROJECT
Ready for an exact, itemized contract with guaranteed pricing? Schedule your on-site measurement with our team. We inspect property lines, assess ground slope, and deliver an official proposal within 24 hours.
- Guaranteed Firm Pricing with Zero Hidden Surcharges
- Laser-Accurate Property Line & Slope Assessment
- Material Samples & Post-Depth Specs Brought to Your Door
Prefer to talk directly? Call 801-753-9619
Request Official Quote
Direct consultation • No obligation • In-person measurement
Before installing your fence, review neighborhood guidelines, determine your privacy or security needs, and choose materials suited to your property’s terrain and climate.
Quick Links
Services
Locations
Contact Us